Dell OptiPlex 7010 Small Form Factor Desktop Computer - Manual (Page 37)

Side cover
Removing the side cover
Prerequisites
1. Follow the procedure in Before working inside your computer .
About this task
The following image indicates the location of the side cover and provides a visual representation of the removal procedure.
Steps
1. Loosen the two captive screws that secure the side cover to the chassis.
2. Slide the side cover towards the back of the computer.
3. Lift the side cover from the chassis.
Installing the side cover
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the side cover and provides a visual representation of the installation procedure.
5
Side cover 37