Installing the hdmi module – Dell OptiPlex 7010 Small Form Factor Desktop Computer User Manual

Page 94

Advertising
background image

Steps

1. Remove the two (M3x3) screws that secure the HDMI module to the chassis.
2. Disconnect the HDMI-module cable from the connector on the system board.
3. Lift the HDMI module off the system board.

Installing the HDMI module

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the HDMI module and provides a visual representation of the installation procedure.

94

Removing and installing Field Replaceable Units (FRUs)

Advertising