Dell OptiPlex 7010 Small Form Factor Desktop Computer - Manual (Page 54)

About this task
The following image indicates the location of the optical drive and provides a visual representation of the installation procedure.
Steps
1. Slide the optical drive into the disk-drive cage until it snaps into place.
2. Install the single (M2x2) screw to secure the optical drive from the disk-drive cage.
Next steps
1. Install the 3.5-inch hard drive if applicable.
2. Install the 2.5-inch hard drive if applicable.
3. Install the disk-drive cage .
4. Install the front bezel .
5. Install the side cover .
6. Follow the procedure in After working inside your computer .
54 Removing and installing Customer Replaceable Units (CRUs)