Dell OptiPlex 7010 Small Form Factor Desktop Computer User Manual
Page 85
Advertising
Steps
1. Remove the protection mylars from the internal antennas.
2. Insert the antennas into the slots on the chassis.
The antennas should be installed on the appropriate slots on the chassis. The following table provides guidance on the
correct installation method.
Table 27. Antenna-cable color Scheme
CHASSIS LABEL
ANTENNA-CABLE COLOR
ANT-W
White
ANT-B
Black
3. Replace the two screws (M3x3) that secure the internal antennas to the chassis.
4. Route the internal-antenna cable through the routing guides on the chassis.
Next steps
1. Install the
if applicable.
2. Install the
.
3. Install the
if applicable.
Removing and installing Field Replaceable Units (FRUs)
85
Advertising