Dell OptiPlex 7010 Small Form Factor Desktop Computer - Manual (Page 96)

6. Remove the disk-drive cage .
7. Remove the Optional I/O modules .
8. Remove the expansion card .
9. Remove the memory modules .
10. Remove the solid-state drive .
11. Remove the WLAN card .
12. Remove the heat-sink and fan assembly .
13. Remove the processor .
About this task
The following image indicates the connectors on your system board.
1. Intrusion-switch cable 2. ATX CPU power connector
3. Processor-fan connector 4. UDIMM slots
From the left (a>b):
DIMM 1
DIMM 2
5. Power-button connector 6. System-power connector
7. M.2 2230/2280 solid-state drive slot 8. M.2 WLAN slot
9. Hard-drive data connector (SATA 0) 10. Optical-drive/hard-drive data connector (SATA 1)
11. SATA power connector 12. Internal-speaker connector
13. PCIe x16 slot (SLOT 2) 14. PCIe x1 slot (SLOT 1)
15. Coin-cell battery socket 16. Processor socket
17. Video connector 18. I/O connector
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
96 Removing and installing Field Replaceable Units (FRUs)