Screw list – Dell OptiPlex 7010 Small Form Factor Desktop Computer User Manual
Page 33
●
Phillips screwdriver #0
●
Phillips screwdriver #1
●
Torx #5 (T5) screwdriver
●
Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 25. Screw list
Component
Screw type
Quantity
Screw image
M.2 2230/M.2 2280 Solid-state
drive
M2x3.5
1
Hard-drive and optical-drive
supporting bracket
#6-32
1
Optical-drive supporting bracket M2x2
1
2.5-inch Hard-drive
M3x3.5
4
3.5-inch Hard-drive
#6-32
4
Serial/VGA module
M2x5
2
DP/HDMI/Type-C module
M3x3
2
SD-card reader
M3x5
1
WLAN card
M2x3
1
Processor-fan and heat-sink
assembly
Captive
4
Voltage regulator heat-sink
Captive
4
Power-supply unit
#6-32
3
Working inside your computer
33