Dell OptiPlex 7010 Small Form Factor Desktop Computer - Manual (Page 72)

Steps
1. Slide the power button into the slot on the chassis.
2. Connect the power button cable to the connector on the system board.
Next steps
1. Install the side cover .
2. Follow the procedure in After working inside your computer .
Intrusion switch
Removing the intrusion switch
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the side cover .
About this task
The following image indicates the location of the intrusion switch and provides a visual representation of the removal procedure.
72 Removing and installing Field Replaceable Units (FRUs)