Dell OptiPlex 7010 Small Form Factor Desktop Computer - Manual (Page 66)

3. Install the 2.5-inch hard drive if applicable.
4. Install the front bezel .
5. Install the side cover .
6. Follow the procedure in After working inside your computer .
Internal speaker
Removing the speaker
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the side cover .
About this task
The following image indicates the location of the speaker and provides a visual representation of the removal procedure.
Steps
1. Disconnect the speaker cable from the connector on the system board.
2. Press the tab, lift and slide the speaker along with the cable from the slot on the chassis.
Installing the speaker
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the speaker and provides a visual representation of the installation procedure.
66 Removing and installing Customer Replaceable Units (CRUs)