Interphase Tech iSPAN - Manual (Page 108)

Setting Up Channels for Logical Adapters
88 Interphase Corporation
b. Specify the clock, coding, and DSR Timer
properties for the serial line.
c. Click OK to save the serial line properties and return
to the Channel properties dialog box.
X.25 Port Properties
The following illustration shows the Port section of the
Channel properties dialog box when the X.25 WAN protocol
is selected.
Figure 5-17. X.25 Channel Port Properties
To set up port properties for a channel using the X.25 protocol,
do the following:
1. In the Card field, if more than one physical iSPAN-
Serial WAN adapter is installed, select the physical
adapter to be used by the channel.
2. In the Network field, if more than one X.25 network
configuration has been created for use by the NDIS
driver, select the network configuration to be used by
this channel.
3. If you need to create, edit, or remove a network
configuration to be used for driver connections, do the
following:
a. Click the Properties button in the Port section of the
Channel properties dialog box.