Interphase Tech iSPAN - Manual (Page 127)

7
iSPAN Serial WAN Adapter Users Guide 107
7 Installing SNA Server
Link Services Software
Overview
SNA Server link services allow you to connect a Windows NT
SNA Server to SNA hosts over a dedicated SDLC, X.25, or
Frame Relay line, or across a Frame Relay or X.25 network.
This chapter describes the process for installing and setting up
SNA Server link services software for your adapter on
Microsoft Windows NT 4.0 systems.
To install the SNA link services software, follow these basic
steps:
1. Verify that your system meets minimum requirements.
2. Install the Base driver.
3. Install SNA Server link services.
This chapter also explains how to remove the Base driver
software. However, it does not provide instructions for
removing SNA link services because they can be removed only
by removing the Microsoft SNA Server software package.
Review the Read Me text file on the iSPAN-Serial WAN
installation CD before installing the adapter software. The
Read Me file contains information about the files included on
the CD. Also, if Read Me First documentation is included in
your installation kit, review it for information about changes
and updates made to this Users Guide after the print date.