Interphase Tech iSPAN - Manual (Page 72)

Removing the Drivers
52 Interphase Corporation
C
AUTION
If you do not reinstall the Service Pack, the network may
fail to start or malfunction when connecting lines. Service
Pack Version 3 or higher is recommended. For installation
information, see the latest available version of your
Service Pack help.
To determine whether a Service Pack is installed, see
Quick Reference of Common Tasks on page 181 .
After the system restarts, the adapter properties must be set up
to match those of the NDIS driver.
• To set up NDIS driver adapter and channel properties,
see Setting Up the NDIS Driver on page 63 .
• To set up firmware, card, and port properties, see
Setting up Firmware and Hardware on page 145 .
• For an overview of common tasks you might need to
perform for the adapter, see Quick Reference of
Common Tasks on page 181 .
Removing the Drivers
This section explains how to remove the NDIS driver along
with the Base driver, and how to remove the Base driver if it is
the only installed driver.
Removing the NDIS and Base Drivers
You can remove the NDIS and Base driver together, or you can
remove the NDIS driver without also removing the Base
driver.