Interphase Tech iSPAN - Manual (Page 162)

Inserting a Connection
142 Interphase Corporation
N
OTE
Properties in the Connection Properties General dialog
box apply to the selected Interphase connection.
Properties in the associated Address, System
Identification, and the 802.2 DLC, SDLC, or X.25 dialog
boxes are SNA Server properties. Verify default SNA
values with your SNA Server administrator or SNA Server
documentation. See your SNA Server documentation for
information about the SNA properties.
5. In the Name field, enter the name of the connection to
be created.
6. In the Link Service field, select the Interphase link
service that will use the connection.
Multiple link services of the same type might be
configured. The number at the end of the link service
name indicates the service number.
– Select the appropriate IPHFR option to insert the
connection for an Interphase Frame Relay service.
– Select the appropriate IPHSDLC option to insert the
connection for an Interphase SDLC service.
– Select the appropriate IPHX25 option to insert the
connection for an Interphase X.25 link service.
7. If you plan to use Permanent Virtual Circuit
connections, make sure the Allowed Directions option
is set to Outgoing Calls.
8. Click OK to complete the connection insertion.