Interphase Tech iSPAN - Manual (Page 140)

Removing Base Driver Software
120 Interphase Corporation
C
AUTION
If any other software requiring the Base driver (such as
the Interphase NDIS driver) is installed in your system, do
not remove the Base driver.
If you no longer need to use the adapter, do the following to
remove the Base driver software from your system:
1. From the Windows Start menu, select Settings, and
then Control Panel.
2. Double-click the Add/Remove Programs icon, then
select the Install/Uninstall tab.
3. Select Interphase 553X Base driver, and click
Add/Remove.
The following message asks whether you want to
remove the software.
Figure 7-13. Base Driver Removal Prompt
4. Click Continue to confirm the removal.