Interphase Tech iSPAN - Manual (Page 143)

8
iSPAN Serial WAN Adapter Users Guide 123
8 Setting up SNA Server
Link Services
Overview
This chapter explains how to insert and set up Interphase SNA
Server link services and connections for the iSPAN-Serial
WAN adapter. The setup procedure is described for SNA
Server 4.0 (with Microsoft SNA Server Service Pack 1).
This chapter explains how to do the following SNA Server link
services setup tasks:
• Access online help
• Insert and set up an Interphase Frame Relay, SDLC, or
X.25 SNA Server link service
• Insert and set up a Frame Relay, SDLC, or X.25
connection
This chapter does not include a detailed description of
Microsoft’s SNA Server software, interface, or configuration.
As a general rule, verify default values that appear in Microsoft
NT dialog boxes, referring to your SNA Server administrator
for assistance. For a complete description of the SNA Server
configuration procedure, see the latest Microsoft SNA Server
documentation, or follow the appropriate links at the Microsoft
web site: http://www.microsoft.com/products.
Microsoft SNA Server, Interphase SNA Server link services
and the standard Base driver (along with the WAN adapter
firmware) must already be installed before setting up SNA
Server link services for the adapter. For installation
instructions, see
Installing SNA Server Link Services Software
on page 107 .