Interphase Tech iSPAN - Manual (Page 57)

Chapter 4: Installing the NDIS Software Package
iSPAN Serial WAN Adapter Users Guide 37
and select the Protocols tab to display the Network
Protocols dialog box.
2. Verify that a supported network protocol is installed.
This protocol can be TCP/IP and/or IPX/SPX.
If you need to install the network protocol(s), click
Add. Then select the appropriate protocol from the list
and follow the onscreen instructions.
3. After you have verified or added the protocol(s) to be
used, select the Adapters tab.
The Network Adapters dialog box appears.
Figure 4-1. Adding the Driver