Interphase Tech iSPAN - Manual (Page 158)

Inserting and Setting Up Interphase Link Services
138 Interphase Corporation
c. Click OK to save the Frame Relay protocol
properties and return to the X.25 Link Service Mode
Settings dialog box.
7. If you want to use this link service remotely from
another SNA Server, select Allow Link Service to be
Distributed.
8. Click OK to save the link service configuration.
– If you edited the X.25 link service, the SNA Server
Manager reappears.
– If you inserted the X.25 link service, the Insert Link
Service dialog box reappears.
9. If you inserted the X.25 link service, continue as
follows:
– If you need to insert another Interphase link service,
on the Insert Link Service dialog box, select the
service and click Add. Then complete setup steps for
that link service, as described in
Setting Up a Frame
Relay Link Service on page 128 or Setting Up an
SDLC Link Service on page 132 .
– If you have finished configuring Interphase link
services, click Finish to return to the SNA Server
Manager. Then continue to
Inserting a Connection
on page 139 .