Interphase Tech iSPAN - Manual (Page 203)

Appendix C: Quick Reference of Common Tasks
iSPAN Serial WAN Adapter Users Guide 183
Make sure that
drivers are running 1. From the Start menu, select Programs, then
Administrative Tools (Common), and then
Event Viewer. The following messages must
appear:
– SynSV6 The Device \Device\SynSV6 has been
successfully created. Its symbolic link name is
\DosDevices\SynSV6.
– SynSYS adapter 0 opened.
– SynSYS SynSys Driver Loaded.
2. From the Start menu, select Settings, and
Control Panel. Then double-click the Devices
icon. The following devices must appear in the
Devices list with a status of Started:
Figure C-2. Devices List
In addition, the software LEDs must be green in the
WAN Adapters Setup dialog box and the NDIS
Driver Setup dialog box.
If you want to... Do this...