Interphase Tech iSPAN - Manual (Page 96)

Setting Up Channels for Logical Adapters
76 Interphase Corporation
To create or modify a channel for an NDIS logical adapter, do
the following:
1. In the Channels section of the NDIS Driver Setup
utility, select to add or edit a channel, as follows:
– To add a channel, click the (Create) icon.
– To edit an existing channel, select the channel and
click the (Edit) icon.
The Channel properties dialog box appears.
Figure 5-7. Channel Properties Dialog Box
This dialog box includes four groups of properties:
• General
• LAN
• WAN
• Port
The topics that follow explain how to set up each group of
channel properties.