Software overview, Software packages, Base driver – Interphase Tech iSPAN User Manual

Page 23

Advertising
background image

Chapter 1: Introduction

iSPAN Serial WAN Adapter Users Guide

3

4 MB dual port DRAM memory and 128 KB Flash

EEPROM

Synchronous serial line with DB25 female connector

(for serial WAN connection only)

V24/V28, V35, or X21/V11 electrical interface

Full plug-and-play installation

Software Overview

The software included with the adapter runs under Windows
NT 4.0 operating systems. It supports up to four iSPAN-Serial
WAN adapters installed in a system.

Two software packages are available: the NDIS package and
SNA Server Link Services package. The software is available
on two CD-ROMs, one for each package.

Software Packages

You can install the NDIS software package, the SNA Server
Link Services software package, or both software packages,
depending on your system needs. Both packages include the
Base driver.

Base Driver

The Base driver is the basic driver required to support the
adapter. It is delivered as a standard product with both the
NDIS driver and SNA Server Link Services.

The Base driver software files include the following utilities:

The WAN Adapters Setup utility enables you to manage

adapter firmware and hardware.

Advertising