Interphase Tech iSPAN - Manual (Page 195)

Appendix B: SynWatch Utility
iSPAN Serial WAN Adapter Users Guide 175
Stopping and Freezing the Display
To stop frame watching and discard all frame information for
a watched port, left-click the checkbox beside the port.
To temporarily stop watch activity without discarding frame
information, freeze the display. Freezing the display allows
you to read information more easily in the monitor panel.
To freeze the display, from the Watch menu, select Freeze. To
resume display at the point where it stopped, from the Watch
menu, deselect Freeze.
Changing Watch Display Settings
The SynWatch window displays information about each
exchanged frame in text lines in the monitor panel. You can
change watch parameters, such as the size of a watched frame
and the character set used to display raw data. You can also
change the appearance of the text that describes the monitored
events on the port.
Changing Watch Parameters
To change the port’s watch parameters, do the following:
1. In the configuration panel, right-click the port, and
select Settings from the pop-up menu. (Or left click the
port and select Settings from the Watch menu.)