Interphase Tech iSPAN - Manual (Page 99)

Chapter 5: Setting Up the NDIS Driver
iSPAN Serial WAN Adapter Users Guide 79
The LAN Properties dialog box appears.
Figure 5-10. LAN Properties Dialog Box
b. If the TCP/IP protocol is selected, in the TCP/IP
fields, specify the channel’s TCP/IP address, the
broadcast option, and the Van Jacobson
compression mode.
N
OTE
The DHCP (Dynamic Host Configuration Protocol) is not
supported in the current version of NDIS Driver and is
unavailable in the dialog box.
c. If the IPX/SPX protocol is selected, in the IPX/SPX
fields, specify the IPX/SPX node address and the
broadcast option.
d. Click OK to save the LAN properties and return to
the Channel properties dialog box.