Interphase Tech iSPAN - Manual (Page 145)

Chapter 8: Setting up SNA Server Link Services
iSPAN Serial WAN Adapter Users Guide 125
Inserting and Setting Up Interphase Link
Services
Use the SNA Server Manager to add and set up the Interphase
link services. This section explains how to do the following:
• Insert a Frame Relay, SLDC, or X.25 link service
• Edit a previously inserted link service
• Set up an inserted Frame Relay link service
• Set up an inserted SLDC link service
• Set up an inserted X.25 link service
Inserting an Interphase Link Service
To insert an Interphase link service, do the following:
1. Open the Microsoft SNA Server Manager window as
described in Starting the SNA Server Manager on page
124 .
2. Open the Servers directory, and select the server on
which you are inserting link services.
3. If the server is running, stop the server. (From the
Service menu, select Stop.)
4. On the SNA Server Manager window, from the Insert
menu, select Link Service.
The Insert Link Service dialog box appears, prompting
you to select a link service from the list.