Removing the base driver – Interphase Tech iSPAN User Manual
Page 76
Removing the Drivers
56
Interphase Corporation
6. After the NDIS driver is removed, the Interphase 553X
Base Driver dialog box appears.
Figure 4-16. Remove Base Driver Dialog Box
The Interphase 553X Base driver dialog box identifies
the Base driver install directory that will be deleted, and
asks if you are sure you want to deinstall the software.
7. Continue as follows:
– If you do not want to remove the Base driver at this
time, click Cancel to remove the NDIS driver only.
Then skip to
Completing the Driver Removal on
– If you do want to remove the Base driver along with
the NDIS driver, continue to the next topic,
Removing the Base Driver
C
AUTION
Before continuing, make sure no other drivers or SNA link
services requiring the Base driver are still installed in
your system.