Kentrox AI296 - Manual (Page 142)

AI296 Version 9.8x User’s Guide
Link Configuration: LAPB Parameters Configuration
6-48
Link Type Availability
MLT and X.25
Configuration in the AI198 Menu System
1. Access menu 4.2.11.12.8 for MLT or menu 4.2.11.12.7 for X.25.
2. For 02*Frame level disconnect , enter 2 to select Active , Passive or Other . The default
is Active .
3. For 03 Frame Window size , enter 3, and the window size. The default is 7 .
This example displays 02*Frame level disconnect set to Passive and 03 Frame Window
size set to 4 .
Configuration in the AI296 Local Menu System
1. Access the MLT or X.25 Link Menu.
2. Select LAPB Menu or X.25 LAPB Menu . The MLT LAPB Menu or X.25 LAPB Menu
appears.
3. For Frame Level Disconnect , select Active , Passive , or Other . The default is Active .
4. For Frame Window Size , enter the window size. The default is 7 .
This example displays Frame Level Disconnect set to Passive and Frame Window Size set
to 4 .
Interface Mode
Description
This menu item configures the interface mode as either DTE or DCE. DTE is used for
a communications device (typically a terminal or computer) that is the source or
destination of signals on a network. DCE is used for a device (typically the modem)
that establishes, maintains, and terminates a session on a network. It may also
convert signals for transmission.
>3 4
Menu 4.2.11.12.7
01*Interface mode (DTE or DCE)----------------------------------------------DCE
02*Frame level disconnect (Active, Passive, Other)----------------------Passive
03 Frame Window size (1 - 7)--------------------------------------------------4
X.25 LAPB Menu
Link being configured . . . . . . . . . . . . . . . . . . . . . . . . . 02
Frame Level Disconnect . . . . . . . . . . . Active [Passive] Other
Frame Window Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4