Kentrox AI296 - Manual (Page 301)

AI296 Version 9.8x User’s Guide
AI296 Commands: diag-info
9-43
This example displays diagnostic information for the Ethernet sonic chip in use on this
card (
SONIC0 ), which is accessed by typing E .
SONIC0
frames_received 2133706 2451073
bytes_received 204088549 233809600
frames_sent 317511
bytes_sent 38293966 0
collisions 116 0
transmit_errors 0 0
crc_errors 0 0
alignment_errors 0 0
missed_packets 0 0
rx_buffers_exhausted 0 0
heartbeatlost 0 0
rx_overruns 0 0
rba_exceeded 0 0
current_tda 8
ex_defers 0 0
ex_coll 0 0
tx_underruns 0 0
bad_tx_size 0 0
tx_blocked 0 2451086
tx_delayed 0 0
state 2 2451086
eth intr stuck: 0----------------233812081
Display Item Description
frames_received Displays the number of frames received on the connection.
bytes_received Displays the number of bytes received on the connection.

Note: This field displays a negative number after it reaches
a count of 2,147,483,647. This is normal operation
and does not indicate an error.
frames_sent Displays the number of frames sent from the connection.
bytes_sent Displays the number of bytes sent from the connection.

Note: This field displays a negative number after it reaches
a count of 2,147,483,647. This is normal operation
and does not indicate an error.
collisions Displays the number of transmit collisions. This is the
number of times the Ethernet device goes to transmit but
cannot because someone else is already transmitting.
transmit_errors Displays the number of transmit errors that have occurred.