Kentrox AI296 - Manual (Page 300)

AI296 Version 9.8x User’s Guide
AI296 Commands: diag-info
9-42
Rx frames received Displays the number of frames received on the
connection.
Rx bytes received Displays the number of bytes received on the
connection.
Tx RL retry limit exceeded Displays the number of times transmitted frames
exceeded the retry limit.
Tx RC collisions Displays the number of transmit collisions. This is
the number of times the Ethernet device goes to
transmit but cannot because someone else is
already transmitting.
Tx UN underruns This displays the number of times the transmitter
has run out of data due to the system being busy.
Tx LC late collisions Displays the number of late collisions on transmitted
frames.
Tx CSL carrier sense lost Displays the number of times that the carrier sense
was lost.
Tx queued buffers Displays the number of queued buffers.
Tx frames sent Displays the number of frames that were
transmitted.
Tx bytes sent Displays the number of bytes that were transmitted.
Unexpected interrupts Displays the number of times that the transfer of
frames was unexpectedly interrupted.
Display Item Description