Kentrox AI296 - Manual (Page 209)

AI296 Version 9.8x User’s Guide
Alias and Call Routing Configuration: Call Routing
8-5
Call Routing
To route calls with AI296, you must configure an alias for a source and destination
protocol.

Note: Aliases created in AI198 are not visible to AI296 when it is running in
standalone mode. However, you can configure aliases in the AI296 local menu
system when it is in standalone mode.
Configuring an Alias in the AI198 Menu System

Note: Specific configuration information about menu items in the following procedure
is located in section Source/Destination Protocol Tables for the AI198 Menu
System on page 8-12 .
To configure an alias in the AI198 Menu System:
1. Log in to AI198.
2. At the prompt, type menu . The main menu appears.
3. To access menu 08+Configure the alias translation table , enter 8 . Menu 8 appears:
4. For 01 Alias name - , enter 1, followed by the alias name for the incoming (source)
call.
AI198 translates the alias name into a call of the type defined in the remaining
alias menu items.
>8
Menu 8
01 Alias name -****************************************************************
02+Simple alias translation
03 Destination -
04 Called address -
05 This alias is visible in the destination menu-----------------------------NO
06 Link number is (1..16) -
07 Caller's address -
08 Call data -
09 App. string -
10 Called protocol -
11 Caller's protocol -
12 Alternate routing alias -
14+Test macros
15 Show entire alias
16 Show the first entry in the alias translation table
17 Show the previous entry in the alias translation table
18 Show the next entry in the alias translation table
19+Delete the above alias translation entry
20 Save the changes made (20b: to the beginning, 20e: to the end)
21 Exit this menu with no changes
Enter item number and optional ",value" then push <CR> key
>