Kentrox AI296 - Manual (Page 282)

AI296 Version 9.8x User’s Guide
AI296 Commands: debug
9-24
debug
Description
This command enables or disables the logging of debugging data.
Tip: You have to have logging turned on to view debug information from a shell
connection.
Command Type
shell
Formats
debug { alias | x25 | pvcfsm | asypvcfsm | nlipvcfsm | tpifsm |
modmuxfsm | allfsm | pppfsm | linkChange | bootp | all } { on | off }
Parameters
alias Enables or disables the logging of alias translation debugging data.
x25 Used primarily by Kentrox Technical Support to isolate system faults.
pvcfsm Used primarily by Kentrox Technical Support to isolate system faults.
asypvcfsm Used primarily by Kentrox Technical Support to isolate system faults.
nlipvcfsm Used primarily by Kentrox Technical Support to isolate system faults.
tpifsm Used primarily by Kentrox Technical Support to isolate system faults.
modmuxfsm Used primarily by Kentrox Technical Support to isolate system faults.
allfsm Used primarily by Kentrox Technical Support to isolate system faults.
pppfsm Used primarily by Kentrox Technical Support to isolate system faults.
bootp Enables or disables the logging of bootp attempts so that users can
determine if the bootp process is still underway or if it has been
completed.
linkChange Enables or disables the logging of debugging data when the PPP
protocol on a link has gone down.
all Enables or disables the logging of all debugging data.
on Enables the logging of specified debugging data.
off Disables the logging of specified debugging data.