Kentrox AI296 - Manual (Page 271)

AI296 Version 9.8x User’s Guide
AI296 Commands: alarm
9-13
Examples
This example displays a list of the alarm groups and the overall alarm severity.
-clear Clears all non-self-clearing alarm groups or a specified non-self-clearing
alarm group.

Note: Only non-self-clearing alarm groups can be manually cleared.
Self-clearing alarms clear themselves when the problem that
caused the alarm is resolved.
The following parameter is accepted:
group —Defines the group of alarms to display, clear, mask, or
unmask. Valid values are existing alarm groups.
-mask Prevents a specified alarm group from affecting overall alarm severity.
The following parameter is accepted:
group —Defines the group of alarms to display, clear, mask, or
unmask. Valid values are existing alarm groups.
-unmask Allows a specified alarm group to affect overall alarm severity. The
following parameter is accepted:
group —Defines the group of alarms to display, clear, mask, or
unmask. Valid values are existing alarm groups.
[296]alarm
Alarm Group Sev Date & Time Message (most recent, most severe in group)
----------- --- ----------- ----------------------------------------------
*general 0 00-00 00:00
links 0 06-01 00:00 Link 1 up.
----------- --- ----------- ----------------------------------------------
*not self-clearing () masked
Overall alarm severity: 0
[296]