Kentrox AI296 - Manual (Page 182)

AI296 Version 9.8x User’s Guide
Link Configuration: Virtual Circuit Configuration
6-88
2. Enter a value ( 02 through 15 ) associated with the PVC to be configured. Menu
4.2.11.12.9.2.1 (the PVC Edit Menu) appears.
3. For 01*PVC Type , enter 1 to select Passive , Active , or Connect on activity . The default
is Passive .
4. For 02 LCN Low , enter 2, and the minimum LCN value. Valid values are 1 to 1024 .
The default is 1 .

Note: An asterisk ( * ) configures all LCNs for the link with values defined in menu
item 4.2.1114.12.9.1.
5. For 03 LCN High , enter 3, and the maximum LCN value. Valid values are 1 to 1024 .
The default is 1 .
6. For 04 RESET Timer Interval , enter 4, and the reset timer interval value.
The timer type, range, and default settings depend on the PVC type. Refer to
Table 6-1 for PVC types, timer types, ranges, and defaults.
>3
Menu 4.2.11.12.9.2.1
01*PVC Type (Passive, Active, Connect on activity)----------------------Passive
02 LCN Low (* for all LCNs for the link)-----------------------------------0001
03 LCN High----------------------------------------------------------------0001
04 RESET Timer Interval (seconds)-----------------------------------------00000
20 Save the changes made
21 Exit this menu with no changes
Enter item number and optional ",value" then push <CR> key
>
Table 6-1 PVC and Timer Type
PVC Type Timer Type Range Default
Active Call Timer 30 to 600 s 30 s
Connect on Activity Inactivity Timer 1 to 600 s 1 s