Kentrox AI296 - Manual (Page 162)

AI296 Version 9.8x User’s Guide
Link Configuration: Quick X.25 Configuration
6-68
3. For Port speed , enter the baud rate. The default is 9600 .
This example displays Port speed set to 128000
SVC Settings
Description
SVCs are network connections that are established when transmission is required
and are disconnected when the session is complete. The SVC settings in the Quick
X.25 menu are configured using two menu items:
z SVC low —Defines the minimum LCN used for SVCs.
z SVC high —Defines the maximum LCN used for SVCs.
Menu Item Type
Data
Link Type Availability
X.25
Configuration in the AI296 Local Menu System
1. Access the X.25 Link Menu.
2. Select Quick X.25 Menu . The Quick X.25 Menu appears.
3. For SVC Low , enter the minimum LCN used for SVCs. This number must be higher
than the number of PVCs. The default is 1 .
4. For SVC High , enter the maximum LCN used for SVCs. This number must be
higher than the SVC Low value. The default is 1 .
Quick X.25 Menu
Link being configured . . . . . . . . . . . . . . . . . . . . . . . . . 02
Interface Mode . . . . . . . . . . . . . . . . . . . . . . . DTE [DCE]
Port speed (0=external clocking) . . . . . . . . . . . . . . . . . . . 128000