Kentrox AI296 - Manual (Page 274)

AI296 Version 9.8x User’s Guide
AI296 Commands: arp
9-16
arp
Description
This command displays, deletes, or adds entries in the ARP cache.
Command Types
shell and winslc
Formats
For the shell:
arp
-a [ ip_address ]
-d ip_address
-s ip_address mac_address
For the winslc command:
winslc baseport arp
-a [ ip_address ]
-d ip_address
-s ip_address mac_address
Parameters
-a Displays all entries in the ARP cache table or just the ip_address entry.
The following parameter is accepted:
ip_address —Defines the IP address of the destination device in
dotted decimal format.
baseport Defines the baseport number for AI296.
-d Deletes an entry from the ARP cache table. The following parameter is
accepted:
ip_address —Defines the IP address of the destination device in
dotted decimal format.
-s Adds a permanent entry to the ARP cache for the current session.
Permanent entries must be in the same subnetwork as the IP address
of the destination device. The following parameters are accepted:
z ip_address —Defines the IP address of the destination device in
dotted decimal format.
z mac_address —Defines the MAC address of the destination device.