Kentrox AI296 - Manual (Page 196)

AI296 Version 9.8x User’s Guide
TID Multiplexing: TID Multiplexing Configuration
7-10
4. For Alias name , enter:
parent_name . m
5. If you are using single alias translation, for Destination , enter the IP address of
AI296. By entering a destination value, you are specifying the use of single alias
translation.
6. For Called address , enter the called address.
7. For Caller's address , enter the caller's address.
8. For Call Data , enter the call data information.
9. For Application String , enter:
TID: tid
10. (optional) For Called protocol , enter the called protocol.
11. For Caller's protocol , enter ="" .
12. Save your changes.
Example Configurations
The following screens display parent and child alias configurations that do the
following:
1. A call comes in on alias 172.16.1.123 at port 1000 ( 172.16.1.123#1000 ).
2. The call fans out into two child calls. 09 App. string in the parent alias
configuration determines the number of children; in this case, it is noted by TMUX2 .
The children have the following names: TL1DM.1 and TL1DM.2 . These names are
established through 08 Call data in the parent alias configuration. The calls to the
first child will be X.25 through link 1 with X.121 address 123456789012
(
X25.1.123456789012 ). The call to the second child will be X.25 through link 2 with
X.121 address 987654321098 ( X25.2.987654321098 ).
parent_name Defines the name you entered for 08 Call data during the parent
alias configuration.
m Defines the child number. Valid values are 1 to n (specified
during the parent alias configuration).
tid Defines the TID of the destination NE. Maximum length is 20 characters.