Kentrox AI296 - Manual (Page 211)

AI296 Version 9.8x User’s Guide
Alias and Call Routing Configuration: Call Routing
8-7
9. For 05 This alias is visible in the destination menu , enter 5 to toggle between Yes
and No .
This setting specifies if the alias will appear in the welcome screen.
10. (optional) For 08 Call data - , enter 8, and the call user data.
Call data is dependent on the type of SLC being used. It may be directly entered
as an alias macro.
11. (optional) For 10 Called protocol - , enter 10, and the called protocol type.
For more information about protocol types, refer to Protocol Processing Modules
on page 8-29 .
12. (optional) For 11 Caller's protocol - , enter 11, and the caller’s protocol type.
For more information about protocol types, refer to Protocol Processing Modules
on page 8-29 .
13. For 20 Save the changes made , enter 20 to save the alias configuration.
14. Repeat this procedure for additional alias configurations.
Configuring an Alias in the AI296 Menu System

Note: Specific configuration information about menu items in the following procedure
is located in section Source/Destination Protocol Tables for the AI296 Menu
System on page 8-20 .
To configure an alias in the AI296 Menu System:
1. Log in to AI296.
2. At the prompt, type menu . The AI296 Main Menu appears.
3. Access the Alias Menu. The Alias Summary Menu appears.