Kentrox AI296 - Manual (Page 399)

B-5
AI296 Version 9.8x User’s Guide
Standalone Mode and Switch Mode: Switch Mode
5. Transfer the software image to AI198:
put filepath / imagename .img

Note: Wait for a completion message after entering this command.
6. Exit the FTP utility.
7. Log in to AI198.
8. At the command prompt, update AI296 with the new software image:
winslc baseport update

Note: You can watch the download process by entering CTRL+L.
9. Wait for the completion message.
filepath Defines the path to the software image file.
imagename Defines the software image file name.
baseport Defines the baseport of AI296.