N2 retry counter, N2 retry counter -50 – Kentrox AI296 User Manual
Page 144
AI296 Version 9.8x User’s Guide
Link Configuration: LAPB Parameters Configuration
6-50
This example displays:
z
05 T1 ack timer
set to
19000
z
06 T2 ack delay timer
set to
20000
z
07 T4 idle timer
set to
50000
.
Configuration in the AI296 Local Menu System
1. Access the MLT or X.25 Link Menu.
2. Select
LAPB Menu
or
X.25 LAPB Menu
. The MLT LAPB Menu or X.25 LAPB Menu
appears.
3. For
T1 Ack Timer
, enter the timer value. The default is
3000
.
4. For
T2 Ack Delay Timer
, enter the timer value. The default is
4000
.
5. For
T4 Idle Timer
, enter the timer value. The default is
25000
.
This example displays:
z
T1 Ack Timer
set to
19000
z
T2 Ack Delay Timer
set to
20000
z
T4 Idle Timer
set to
50000
.
N2 Retry Counter
Description
This menu item defines the maximum number of accepted retransmissions for
unacknowledged frames.
>7,50000
Menu 4.2.11.12.8
01*Interface mode (DTE or DCE)----------------------------------------------DCE
02*Frame level disconnect (Active, Passive, Other)---------------------- Active
03 Frame Window size (1 - 7)--------------------------------------------------7
04 N2 retry count (0 - 255)-------------------------------------------------150
05 T1 ack timer (100 - 25500 ms)------------------------------------------19000
06 T2 ack delay timer (100 - 25500 ms)------------------------------------20000
07 T4 idle timer (0 - 200000 ms)-----------------------------------------050000
MLT LAPB Menu
Link being configured . . . . . . . . . . . . . . . . . . . . . . . . . 03
Frame Level Disconnect . . . . . . . . . . . [Active] Passive Other
Frame Window Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
N2 Retry Counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
T1 Ack Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19000
T2 Ack Delay Timer . . . . . . . . . . . . . . . . . . . . . . . . . . .20000
T4 Idle Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50000