Kentrox AI296 - Manual (Page 345)

AI296 Version 9.8x User’s Guide
AI296 Commands: show
9-87
data Displays link data. The following parameters are accepted:
z link_range —Defines a link or range of links. Valid values are 1 to
32. Individual values are separated by commas (,) and hyphens (-
). For example,
1,4-6 specifies links 1, 4, 5, and 6.
z * —Specifies all links.
date Displays the date and time.
eth Displays Ethernet information.
inventory Displays the serial number, product name, manufacture date, and
MAC address (when in standalone mode).
ip Displays the IP address, subnet mask, and high IP address.
log Displays the contents of the log file, same as command sholog .
mem Displays memory allocation.
perf Displays serial link performance. The following parameters are
accepted:
z link_range —Defines a link or range of links. Valid values are 1 to
32. Individual values are separated by commas (,) and hyphens (-
). For example,
1,4-6 specifies links 1, 4, 5, and 6.
z * —Specifies all links.
ports Displays the link number, link type, and description for all available
ports or for a specified range of ports. The following parameters are
accepted:
z link_range —Defines a link or range of links. Valid values are 1 to
32. Individual values are separated by commas (,) and hyphens (-
). For example,
1,4-6 specifies links 1, 4, 5, and 6.
z * —Specifies all links.
pvc Displays PVC connections.
router Displays the default and backup gateway IP address.
tconn Displays complete connections.
tcp Displays TCP information, such as maximum keepalive tries, dropped
SNMP requests, and total opened sockets.
version Displays the version number of AI296.
wan Displays WAN diagnostic information.