Kentrox AI296 - Manual (Page 336)

AI296 Version 9.8x User’s Guide
AI296 Commands: pvcedit
9-78
pvcedit
Description
This command allows a change to occur on a PVC without bringing down (bouncing)
the entire link. This command can also be used to reset the PVC without resetting the
entire link. If no options are specified, the PVC is simply reset. This command also
has the following constraints:
z Only asynchronous and X.25 PVCs are to be used.
z Asynchronous PVCs can be reset only.
z X.25 PVCs can be reset and altered.
Command Types
shell and winslc
Formats
For the AI296 system command:
pvcedit
asy. link_number . lcn [ -a call_timer | -c inactivity_timer | -p ]
x25. link_number . lcn [ -a call_timer | -c inactivity_timer | -p ]
For the winslc command:
winslc baseport pvcedit
asy. link_number . lcn [ -a call_timer | -c inactivity_timer | -p ]
x25. link_number . lcn [ -a call_timer | -c inactivity_timer | -p ]
Parameters
-a Forces the PVC to activate with the corresponding call
timer.
asy. link_number . lcn Defines the link number and logical channel number for
the asynchronous PVC being edited.
baseport Defines the baseport number for AI296.
-c Forces the PVC to connect on activity with the
corresponding inactivity timer.
call_timer Defines the value of the call timer. Valid values are from
30 to 600.
inactivity_timer Defines the value for the inactivity timer. Valid values are
from 1 to 600.