Kentrox AI296 - Manual (Page 303)

AI296 Version 9.8x User’s Guide
AI296 Commands: diag-info
9-45
This example displays diagnostic information for TCP data, which is accessed by
typing
T .
state Displays the current state of the Ethernet interface. The
following values may appear:
z 0 —The Ethernet interface is uninitialized.
z 1 —The Ethernet interface is idle.
z 2 —The Ethernet interface is active.
z 3 —The Ethernet interface needs to be reset.
eth intr stuck Displays the number of times the Ethernet interface interrupt
has stuck while servicing the interrupt.
T C P / I P I N F O
Copied ethernet receive packet: 0
TCP keepalive failed: 0
TCP max keepalive tries: 1
Dropped SNMP request: 0
Enter M-emory, A-sync, E-thernet, T-cp or Q-uit:
Display Item Description
Copied ethernet receive packet: Displays the number of copied Ethernet receive
packets.
TCP keepalive failed: Displays the number of TCP keep-alive
messages that have been sent and were
expected to be received, but were not received.
TCP max keepalive tries: Displays the maximum number of TCP keep-alive
messages received on the connection.
Dropped SNMP request: Displays the number of dropped SNMP requests.
Display Item Description