Kentrox AI296 - Manual (Page 185)

AI296 Version 9.8x User’s Guide
Link Configuration: Virtual Circuit Configuration
6-91
Menu Item Type
Data
Link Type Availability
X.25
Configuration in the AI198 Menu System
1. Access Menu 4.2.11.12.9.
2. For 03 Incoming only SVC low , enter 3, and the minimum LCN used for incoming
only SVCs. The default is 0 .
3. For 04 Incoming only SVC high , enter 4, and the maximum LCN used for incoming
only SVCs. The default is 0 .
Important: AI296 can only receive calls on incoming only SVCs that are greater
than the maximum PVC.
4. For 05 Two-way SVC low , enter 5, and the minimum LCN used for an SVC. The
default is 1 .
Important: This value must be greater than the number of PVCs and/or
incoming SVCs.
5. For 06 Two-way SVC high , enter 6, and the maximum LCN used for an SVC. The
default is 1 .
6. For 07 Outgoing only SVC low , enter 7, and the minimum LCN used for outgoing
only SVCs. The default is 0 .
7. For 08 Outgoing only SVC high , enter 8, and the maximum LCN used for outgoing
only SVCs. The default is 0 .
Important: AI296 can place calls on outgoing only SVCs greater than the
maximum PVC and/or two-way SVC.