Oki B4100 User Manual
Page 105
40055101TH Rev.4
105 /
Table 2.9.4 (1/4) User's Initial Settings (One-touch key Program)
F+OT
Item
Specifications
No.
Rev.3
1
Delayed transmission (Tx)
2
Broadcast/memory transmission
3
Confidential transmission
4
Relay broadcast initiate transmission
5
Polling transmission/reception
6
Report printing
This function enters a message transmission time(s) and location(s)
for execution at a specified time.
To make a one-time selection of the memory transmission mode.
Max. 56 (OKIOFFICE44/OKIFAX 4100), Max. 84 (OKIFAX
5200/5300) and Max. 134 (OKIFAX 5500/5600) remote loca-
tions can be specified by the following means:
• One-touch key (with of without a group list)
• Two-digit auto dial code
• Keypad dial number
When multiple locations are specified for one broadcast,
1)
The fax can print a broadcast confirmation report, if specified
in operating sequence.
To program the mail box number 01 to 64.
Available remote station’s mail box numbers:
OKIFAX 2400/2600:
01 to 40
OKIFAX 1000:
01 to 16
OKIFAX 2300/OF-18/OF-150:
01 to 16
OKIFAX 38/OF-27:
01 to 64
OKIFAX 2350/OKIFAX 1050: 01 to 08
OKIFAX 2450:
01 to 16
OKIFAX 5200/5300:
01 to 08
OKIFAX 5500/5600:
01 to 16
This function automatically originates a message call via relay key
station (which must be equipped with OKIFAX 2600, OF-38, OF-
27 or equivalent) up to 120 locations for OKIFAX 2600 and 99
locations for OF-38 or OF-27.
To program relay password.
To enable or disable the relay report.
Enable the relay key station to send to your fax machine a relay
report by programming your fax number to auto dial No. 45 for
OKIOFFICE44/OKIFAX 4100 or to auto dial No. 64 for OKIFAX
5200/5300 or to auto dial No. 99 for OKIFAX 5500/5600.
Polling TX:
The documents placed on the feeder can be collected by a remote
station.
Polling RX:
The fax can collect documents from one remote station.
1.
Activity report
2.
Broadcast message confirmation report
(Multi location)
3.
Phone directory report
4.
Configuration report
(Serviceman report if service bit sets to ON.)
5.
Protocol dump report
*
TF + 01 (Sets to on Service bit)