Oki B4100 - Manual (Page 107)

40055101TH Rev.4 107 /
9 User’s programs
1.
Function program
2. Dial parameters
3. Clock adjustment
Table 2.9.4 (3/4) User's Initial Settings (One-touch key Program)
F+OT
Item Specifications
No.
Function program
01: MCF (SINGLE-LOC.)
02: MCF (MULTI-LOC.)
03: ERR. REPORT (MCF.)
04: IMAGE IN MCF.
05: SENDER ID
06: MONITOR VOLUME
07: BUZZER VOLUME
08: CLOSED NETWORK
09: TX MODE DEFAULT
10: T/F TIMER PRG.
11: RING RESPONSE
12: DISTINCTIVE RING
13: 1’ST PAPER SIZE
14: 2’ND PAPER SIZE
15: USER LANGUAGE
16: INCOMING RING
17: REMOTE RECEIVE
18: MEM./FEEDER SW.
19: POWER SAVE MODE
20: ECM FUNCTION
21: REMOTE DIAGNOSIS
22: PC/FAX SWITCH
23: ONE TOUCH PARAM.
Refer to Table 2.9.4 for Specification of the function programs No.
01 through 23
Dial parameters
1. REDIAL TRIES
2. REDIAL INTERVAL
3. DIAL TONE DETECT
4. BUSY TONE DETECT
5. MF (TONE)/DP (PULSE)
6. PULSE DIAL RATE
7. PULSE MAKE RATIO
8. PULSE DIAL TYPE
9. MF(TONE) DURATION
10. PBX LINE
11. FLASH/EARTH/NORMAL
12. AUTO START
13. DIAL PREFIX
14. IT2 DETECT (FRE only)
Refer to Table 2.9.6 for specification of dial parameter settings.
Date and time adjustment.
Rev.3