Oki B4100 User Manual
Page 608
Advertising
40055101TH Rev.4
608 /
H
N
Detail A
Guide R (2nd) Assy
0
O
I
J
Q
O
K
D
TQSB-2PCB P
Motor
M
Motor Bracket L
E
B
F
G
Rear Cover C
A
9
(6)
Remove three screws 9 which are holding the guide R (2nd) assy 0 to the bottom plate A. Remove
the screw B which is keeping the rear cover C and guide R (2nd) assy 0. Remove the guide R (2nd)
assy 0.
(7)
Remove the protect (M) D, guide bracket E, planet gears F and planet gear bracket G.
(8)
Remove the E-ring H which is keeping the sheet link I on the guide R (2nd) assy 0, and pull out the
hinge stand J.
(9)
Remove three remaining screws K which are keeping the motor on the motor bracket L, and remove
the connector off the Stepping Motor M.
(10) Remove two screws N on the Stepping Motor M.
Advertising