Oki B4100 - Manual (Page 78)

40055101TH Rev.4 78 /
TECHINICAL PROGRAMMING
Powered on while holding the
COPY key down.
Selection by YES/NO keys or digit (1 to 4)
Selection by YES/NO keys or digit (1 to 8)
Selection by YES/NO keys or digit (1 to 3)
01: SERVICE BIT
02: MONITOR CONT.
03: COUNTRY CODE
04: TIME/DATE PRINT
05: TSI PRINT
06: NO TONER MEM. RX
07: TAD MODE
08: REAL TIME DIAL
09: TEL/FAX SWITCH
10: MDY/DMY
11: LONG DOC. SCAN
12: TONE FOR ECHO
13: MH ONLY
14: H/MODEM RATE
15: T1 (TX) TIMER VALUE
16: T1 (RX) TIMER VALUE
17: T2 TIMER *100 MS
18: DIS BIT 32
19: ERR. CRITERION
20: OFF HOOK BYPASS
21: NL EQUALIZER
22: ATTENUATOR
23: T/F TONE ATT.
24: MF ATT.
25: RING DURA.
∗
10 MS
26: CML TIMING
∗
100 MS
27: LED HEAD STROBE
28: LED HEAD WIDTH
29: MEDIA TYPE
30: TR LATCH CURRENT
(for OKIOFFICE44/OKIFAX 4100)
∗
31: SYMBOL RATE (for OKIFAX 5500/5600)
3: SYSTEM RESET
1: ALL DATA CLEAR
3: CONFIG. DATA CLEAR
1: LOCAL TEST
2: TECHCICAL FUNCTION
4: DEFAULT TYPE SET
1
2: LOCATION DATA CLEAR
2: SENSOR CALIBRATION
3: LED TEST
4: TONE SEND TEST
5: MODEM SEND TEST
6: MODEM RECEIVE TEST
7: MF (TONE) SEND TEST
8: TONE (TEL/FAX) TEST
1: SELF DIAGNOSIS
* Space for OKIFAX 5500/5600
Function 30 is used as “V.34 Learning Parameter for OKIFAX 5500/5600