Oki B4100 - Manual (Page 636)

40055101TH Rev.4 636 /
4.3.1 Confirmation
Select a drive with the [Space] key.
Since it is assumed that data is stored on a floppy disk, you can select drive A or drive B.
When setup is ready, insert a formatted floppy into the drive and press the [Enter] key, then saving is initi-
ated.
• Press [Esc] to terminate saving message and return to the main menu screen.
4.4 Loading Message
Model Selection:
Select “MESSAGE LOAD” on the menu screen, the following screen is displayed.
Enter the key number indicated on the left side of the model with a message reset.
• Press [Page Up] or [Page Down] to scroll the screen back to the previous page or up to the next page.
• Press [Esc] to terminate the FAX model selection and return to the menu screen.
< REMOTE MANAGEMENT CENTER SYSTEM >
<< MESSAGE MODIFYING TOOL>>
<< MESSAGE SAVE >>
SOURCE : RMCS SYSTEM
DESTINATION : A(FD)
PLEASE INSERT A FORMATED DISK,
THEN PRESS THE ENTER KEY TO SAVE.
(PRESS THE ESC KEY TO CANCEL)
<REMOTE MANAGEMENT CENTER SYSTEM>
<< MESSAGE MODIFYING TOOL>>
[S] : RMCS SYSTEM
[0] : FAX MODEL0
[1] : FAX MODEL1
[2] : FAX MODEL2
[3] : FAX MODEL3
[4] : FAX MODEL4
[5] : FAX MODEL5
[6] : FAX MODEL6
[7] : FAX MODEL7
[8] : FAX MODEL8
[9] : FAX MODEL9
<< MESSAGE LOAD>>
[PAGE UP] : PREVIOUS PAGE
[PAGE DOWN] : NEXT PAGE
PLEASE SELECT THE FAX MODEL
(PRESS THE ESC KEY TO CANCEL)
1/1