R m c s – Oki B4100 User Manual
Page 631
40055101TH Rev.4
631 /
3.
RMCS Basic Operation
3.1
Activating and Terminating the system
Before Activating the system
If the facsimile terminal is equipped with a selector function to “enable” or “unable” remote maintenance, set
to “enable” in advance.
3.1.1 To Activate
Enter the following command in the PC-DOS command input state.
C>RMCS
After completing the necessary preparations, the ID and password entry screen is displayed.
3.1.2 Entering the ID and Password
The ID is recorded in the operation report as part of the system operator history. Enter up to 50 alphanumeric
characters except [“], [\] for the ID.
Enter the password registered at installation. When the correct password is entered. TEL Directory menu
screen is displayed.
If you enter wrong password three times, ID and password entry screen is closed and return to the PC-DOS
command input state.
Remote Management Center System
Copyright (C)1995 Oki Data Co., Ltd.
Copyright (C)1995 Micro Technology Co.
R M C S
R M C S
12/10/1996 18:08 Operator ID [ ] scrn xxxx
ID [ ]
Password : • • • • • • • • • • • • • •