Oki B4100 - Manual (Page 188)

40055101TH Rev.4 188 /
4.2.3.3 Control Panel Assembly, Paper Guide (U) Assembly.
(1) Disassembly procedure
1) Control Panel Assembly and Paper
Guide (U) Assembly
a) First, carry out the disassembly
procedure up to the point of the
4.2.3.2 (Main Cover, NCU Cover
and Rear Cover).
b) Remove the ground cable by re-
moving the screw 1.
c) Disconnect the connector of the
Control Panel from the MCNT
Board.
d) The removal of the two screws
2 results into two separate as-
semblies:
Control Panel Assembly and Pa-
per Guide (U) Assembly.
2) Control Panel Assembly
a) Remove the OPE Board by re-
moving the 10 small screws 3
and the part of the fixing hooks
(8).
b) Remove the part of LED by re-
moving the two screws 4.
Screw 2
(FX-050VP-C4-008)
Control Panel
Assembly
Ground cable
Connector
Paper Guide U
Assembly
Screw 3 (10)
Fixing hooks (8)
(FX-050VP-C4-009)
Screw 4
Part of LED
(FX-050VP-C4-010)