Oki B4100 - Manual (Page 508)

40055101TH Rev.4 508 /
Exit roller
Heat roller
Transfer roller
Cleaning roller
CH roller
Drum roller
Developing roller
Outlet sensor
Paper sensor
Hopping roller
TRAY printing
Feed roller
Manual
feed
sensor
Manual printing
2
Roller to be driven by reverse rotation of pulse motor (Main)
1
Motor to be driven by normal rotation of pulse motor (main)
Roller control by pulse motor (main) 1
Normal rotation of pulse motor (main):
2
Reverse rotation of pulse motor (main):
Drum roller, transfer roller, cleaning roller, CH roller, developing roller, heat roller, exit roller rotation Drum roller, transfer roller, cleaning roller, CH roller, developing roller, heat roller, exit roller, feed roller, hopping roller rotation Hopping operation from the tray, however, is performed when the electromagnetic clutch is turned on.
Figure B1.2 Schematic Drawing of OKIFAX 4100 Paper Feeding