Oki B4100 User Manual
Page 434
Advertising
40055101TH Rev.4
434 /
A3.5.2
OLHV/TLHV Circuit Diagram (2/2)
This circuit consists of photo-sensors and high voltage generation unit.
Note: If the high-voltage unit inside the OLHV/TLHV circuit board is replaced, the output voltage and
current output from the terminals must be checked and adjusted. This section does not describe
the checking and adjustment methods, however.
DANGER:
DANGER
Do Not
Touch !
HIGH VOLTAGE
You may be subjected to high-voltage electric shock by touching the
following parts without an insulating material:
a. High-voltage unit
b. Contact ass'y
High voltage outputs are connected to the contact ass’y as shown below:
Advertising