Oki B4100 - Manual (Page 193)

40055101TH Rev.4 193 /
3) Stacker Cover
a) Disconnect the flat cable.
b) Remove the Copy Stacker by
pressing inward the two latches
on it from the two reset levers.
c) Remove the Copy Stacker by
spreading it from the lower base.
4) Fusing Unit
a) Remove the Fusing Unit by re-
moving the four screws 2.
5) Manual Feed Assembly
a) First, carry out the disassembly
procedure up to the point of Main
Cover removal. (Refer to sub-
section 4.2.3.2)
b) Remove the Manual Feed Assem-
bly by pressing inward the two
retainers.
(2) Reassembly procedure
Reverse the disassembly procedures.
(FX050-C4-021)
Copy Stacker
Flat cable
Reset lever
Reset lever
(FX050-C4-022)
Fusing Unit Screws 2
Screws 2
Retainer
Manual Feed
Assembly
Retainer
(FX-050VP-C4-020)